“I cant thank you enough for offering your fly tying class! I had no idea that I would enjoy learning to tie flies as much as I did, and assuring everyone that you are there to answer any questions made me very comfortable” -Lisa…
Polish quills are an excellent way to achieve segmented bodies without the hassle of stripping peacock quills, not to mention they come in a wide variety of different colors.
They can be used on nymphs, dry flies, soft hackles and anything else you can imagine while sitting behind your vise.
You can never have too many! And as Joe Fox over at Dette trout flies knows, each time he restocks them, hes more than likely going to be graced with my presence as I pass through town, make a bee line for his shop and buy a few more packs.
Its an addiction I tell you!
Now, Let me put the coffee down and try to be serious for a minute.
With these quills You can tie a variety of sizes, and depending on what you’re tying you can usually go as big as a size 12, but that will vary on your fly tying style (such as; is that size 12 or 10 going to have a hackle in front to take up the slack where the quill ends? Are you using a bead? Ect)
It’s also is based on the size and thickness of each quill that comes in a package.For the most part they are uniform, but they aren’t synthetic, which is why there will be a tiny variation between them.
Please note, that this step by step is to teach you how to use the Polish quill correctly. But something that will make or break your final outcome, is creating a uniform underbody.
I Have included extra trouble shooting photos at the end of this page that may be attributed to a poorly shaped underbody for anyone still having issues. You can find a step-by-step here with help on creating one before you begin, it will open in a new window so that you can continue tying. For the sake of focusing on the technique, I have taken these photos with a mostly bare shank and kept the underbody post separate. You will also note that at this time we aren’t using head cement on the shank before wrapping. I have omitted this because as a beginner you may need to unwrap and wrap it again to practice, and if the cement hardens as you practice; your quill will break.
Now! Go on and grab a package of Polish quills and take one out!
The first thing you will notice when you take them out of the package is that there is a dark edge/line on one side.
By paying attention to that dark line when you tie in and wrap forward, you will have a clear segmentation or you will have a more of a one colored quill body.
Some flies you tie may require a solid body with very minimal segmentation. If that’s the case then just tie them in the “wrong” way.
It’s all up to you and what you’re wishing to achieve. But I use the term “wrong” very loosely; since your right- may be someones wrong. Which is why I am making this tutorial to help you reach the results that you are looking for, when it comes to tying with polish quills.
The other thing you will notice is the taper of the quill and how there’s a piece of peacock herl at the small end. That will be your tie in point.
(This may seem confusing but It will make more sense when you see this step-by-step as it was also demonstrated here -when working with turkey biots.)
Let us begin!!
Take the end of the quill with the Peacock herl and place it on the side of the hook that is facing toward you, with the edge that has the black stripe – facing down. Got it?
Hook side to you.
Black stripe down.
With the excesses trimmed, you’re going to start wrapping and here is where you will see if you are an “over the material” tyer or “to the side of the material” tyer, and once you see where your end result is headed you can adjusted it to the way that works for you.
When you bring the Polish quill around, you want to wrap it away from you.
Keeping the material flat around the hook will keep that black stripe towards the jaws of your vise, and give you that segmentation.
See how simple that was? got it? see how the black line stays towards the vise jaws?
And you are overlapping it?
But you DID tie it in with the black straight down right??
I’m sure you did, which is why its probably not a case of “operator error”, its just that everyone has their own way of doing things, and like they say “You cant change the direction of the wind, you can only adjust your sails”
And now we will do just that.
If you have reached this point and it still isn’t working, take a look below
I will demonstrate this below because this may be your problem, and its something that can be easily corrected if you are unknowingly one of the “over material tyers”
Stop here. See whats going on? By making that one little overlap, you have now just spun around the entire quill as seen below.
As you brought it back up you, it has now twisted and you have just lost that edge.It will be hidden underneath.
If you have a tendency to do this, the “tying over your material” move, it isn’t the end of the world. You can stop yourself if you want, but If its something that you are on auto pilot with and cant seem to stop; then the solution is simple.
Flip the quill at the tie in point. Tie the quill in with the black stripe.. UP and AWAY from you. Because as you overlap and twist you’ll then bring it back to the position that’s necessary to show the clear segmentation!
This fly below was tied in that way. And as long as it doesn’t create a bump when overlapping then whats it really hurting? Nothing.
So its not that you’re doing it wrong, its just that we have all reached the level of our tying differently. One way that works for someone else may not work for you.
So adjust your sails.
And continue on!
As you can see, it still came out the way I wanted.
Now once you have reached the end of your fly where you will begin the next step, just tie that material off..
Add your favorite UV resin or head cement to the quill and let it dry before you tie in the next material.
That’s it! Now once you feel comfortable with this technique you can use a small amount of head cement on the hook shank before you wrap it, as this will help keep it from sliding.
Now I hope this tutorial will clear up the issues many people have when learning to tie with polish quills.
BUT! If for some reason you are still having trouble, or your flies have turned into any of the ones in the slideshow below; please check out the second installment on The importance of a uniformly wrapped thread underbody, when using material such as Polish quills. The problem you may be experiencing could very well be attributed to a problem with your underbody
If you are tying different sizes, use the short or thinner ones for the small flies first. This way you dont end up with ones that are too short, since you used all the big ones up on size 18’s first.